96D-R5 系列 30瓦 1.6KV隔離電壓 2:1寬輸入直流對直流電源轉換器

產品描述

功能&特點

30瓦 DIL 包裝。
寬輸入2:1電壓範圍。
100%高溫預燒測試。
效率高達89%。
可提供客製化。
具備遙控開關功能。
符合UL94V-0規範包裝材質。
操作環境溫度:-40°C 至 +85°C。
產品保固3年。

Specifications Typical At TA = 25°C, Nominal Input Voltage And Rated Output Current Unless Otherwise Specified

Part Number	Input Voltage	Input Current		Output Voltage	Output Current	Output Ripple & Noise	Capacitor Load Max	Efficiency
Part Number	Vdc	No-Load (mA TYP)	Full Load (mA TYP)	Vdc	Full Load (mA)	mVp-p	uF Max	%TYP
96D-12S03R5NL	9-18	120	2398	3.3	7500	100	20000	86
96D-12S05R5NL	9-18	130	2841	5.0	6000	100	14400	88
96D-12S12R5NL	9-18	50	2809	12	2500	100	3000	89
96D-12S15R5NL	9-18	50	2809	15	2000	100	2000	89
96D-24S03R5NL	18-36	70	1200	3.3	7500	100	20000	86
96D-24S05R5NL	18-36	80	1420	5.0	6000	100	14400	88
96D-24S12R5NL	18-36	30	1404	12	2500	100	3000	89
96D-24S15R5NL	18-36	30	1404	15	2000	100	2000	89
96D-48S03R5NL	36-72	40	600	3.3	7500	100	20000	86
96D-48S05R5NL	36-72	50	710	5.0	6000	100	14400	88
96D-48S12R5NL	36-72	30	702	12	2500	100	3000	89
96D-48S15R5NL	36-72	30	702	15	2000	100	2000	89
96D-12D12R5NL	9-18	60	2873	±12	±1250	100	±2000	89
96D-12D15R5NL	9-18	60	2873	±15	±1000	100	±1300	89
96D-24D12R5NL	18-36	30	1437	±12	±1250	100	±2000	89
96D-24D15R5NL	18-36	30	1437	±15	±1000	100	±1300	89
96D-48D12R5NL	36-72	30	718	±12	±1250	100	±2000	89
96D-48D15R5NL	36-72	30	718	±15	±1000	100	±1300	89

Note:
1. BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment)
MIL-STD-217F Notice2 @Ta=25 ºC, Full load (Ground, Benign, controlled environment)
2. The ON/OFF control pin voltage is referred to -Input. (Leave open if not used.)

Input Specifications

Parameters	Conditions		Min	Typ	Max	Units
Voltage Types					2:1
Filter	Pi TYPE
Input surge voltage 100mS max	12V, 24V input 48V input			50 100		Vdc Vdc
Input reflected ripple current	Nominal Vin and full load			20		mAp-p
Start up time	Nominal Vin and constant resistive load	Power up		40		mS
Start up time	Nominal Vin and constant resistive load	Remote ON/OFF		30		mS
Start-up voltage	12V input			9		Vdc
	24V input			18		Vdc
	48V input			36		Vdc
Shutdown voltage	12V input			8		Vdc
	24V input			17		Vdc
	48V input			35		Vdc
Protection	Fuse Recommended
Remote ON/OFF (Note 2)	DC-DC ON		OPEN
Remote ON/OFF (Note 2)	DC-DC OFF		Short to ground
Input current of Remote control pin	Nominal Vin		-0.5mA ~ +0.5mA
Remote off state input current	Nominal Vin		3mA

Output Specifications

Parameters	Conditions	Typ	Max	Units
Voltage Tolerance	Full load@Vin(nom.)		±2	%
Short Circuit Protection	Hiccup, automatic recovery
Over Load Protection	nominal input	150		%
Over Voltage Protection (Zener Diode Clamp)	3.3V Output 5.0V Output 12V Output 15V Output	3.9 6.2 15 & ±15 18 & ±18		V V V V
Line Regulation	LL to HL at Full Load		± 0.5	%
Load Regulation	Single		± 0.5	%
Load Regulation	Dual, Balance Load, 25% to 100% load		±1.0	%
Cross Regulation	Dual (25% to 100% Load)		±5.0	%
Ripple & Noise	20MHz bandwidth		100	mVp-p
Transient response recovery time	25% load step change	250	350	us
External Trim Adj. Range		±10% of Output

General Specifications

Parameters	Conditions	Min	Typ	Max	Units
Isolation Resistance	500Vdc	1000			MΩ
Switching Frequency			300		KHz
Isolation Capacitance			2200		pF
Case Material	Nickel coated copper with no-conductive base
Potting material		Epoxy (UL94-V0)
Isolation Voltage	For 10 seconds			1600	VDC
Design meets safety	IEC60950-1, UL60950-1, EN60950-1
Dimensions	-R5NL -R5HSNL	50.8X 25.4 X 10.6 50.8X 25.4 X 15.3			mm mm
Weight		36.5			g
MTBF (Note 1)	BELLCORE-TR-NWT-000332 MIL-HDBK-217F	3.163 x 10⁶ 4.347 x 10⁵			hrs hrs

Environmental Specifications

Parameters	Conditions	Min	Typ	Max	Units
Operating Temperature		-40		+85	℃
Maximum case temperature				+105	℃
Storage Temperature		-55		+125	℃
Thermal impedance @20LFM	Convection		12		℃/Watt
Thermal impedance @20LFM	Convection with heat-sink		10		℃/Watt
Thermal shock		MIL-STD-810F
Vibration		MIL-STD-810F
Relative humidity		5% to 95% RH

Dimension

Files Download 96D-R5-Series.pdf

96D-R5 系列 30瓦 1.6KV隔離電壓 2:1寬輸入 直流對直流電源轉換器