13D-2W 系列 2瓦 1KV隔離電壓 直流對直流電源轉換器
產品描述
功能&特點
PIN SIP 包裝
效率高達85%。
非穩壓輸出類型。
內部為SMD結構。
操作環境溫度:-40℃ 至 +85℃。
不需外部零組件。
工業標準引腳。
Specifications Typical At TA = 25°C, Nominal Input Voltage And Rated Output Current Unless Otherwise Specified
| Part Number | Output Voltage | Output Current | Efficiency |
|---|---|---|---|
| Vdc | mA | % | |
| 13D-XXS05N2WNL | 5 | 400 | 70 |
| 13D-XXS09N2WNL | 9 | 222 | 75 |
| 13D-XXS12N2WNL | 12 | 167 | 80 |
| 13D-XXS15N2WNL | 15 | 133 | 80 |
| 13D-XXS24N2WNL | 24 | 84 | 85 |
Note:
1. ”XX” Is Input Voltage : 05=5Vdc,09=9Vdc,12=12Vdc,15=15Vdc,24=24Vdc.
2. The input voltage increases, there will be an increase in efficiency.
Input Specifications
| Parameters | Conditions | Min | Typ | Max | Units |
|---|---|---|---|---|---|
| Voltage Tolerance | Vo,Io Nom | ±10 | % | ||
| Filter | Capacitor |
Output Specifications
| Parameters | Conditions | Min | Typ | Max | Units |
|---|---|---|---|---|---|
| Voltage Tolerance | 100% full load | ±5 | % | ||
| Short Circuit Protection | Short Term | 1 | Sec | ||
| Line Regulation | For 1.0% of Vin | 1.2 | % | ||
| Load Regulation | 3.3V, 5V (10% To 100% F.L) | 15 | % | ||
| Load Regulation | 9V,12V,15V,24V (10% To 100% F.L) | 10 | % | ||
| Ripple & Noise | BW=DC To 20MHz | 100 | mVp-p | ||
| Transient response setting | 50% load step change | 350 | us |
General Specifications
| Parameters | Conditions | Min | Typ | Max | Units |
|---|---|---|---|---|---|
| Isolation Resistance | 500Vdc | 1000 | MΩ | ||
| Switching Frequency | Full load, nominal input | 100 | KHz | ||
| Operating Temperature | -40 | +85 | ℃ | ||
| Humidity | Non Condensing | 95 | % | ||
| Cooling | Free air Convection | ||||
| Case Material | DAP | ||||
| MTBF | MIL-HDBK-217F @25℃ | 3500000 | Hours | ||
| Weight | 1.8 | g | |||
| Dimensions | 11.50 x 7.50 x 10.00 | mm | |||
Dimension
Files Download 13D-2W-Series.pdf
Certification